Are you tired of the constant dripping sound coming from your bath tap? A leaky tap can be both annoying and wasteful. But don’t worry, with a little bit of know-how, you can easily fix it yourself. In this step-by-step guide, we’ll show you how to fix a leaky bath tap and put an end to that pesky drip.
1. Turn Off the Water Supply
The first step in fixing a leaky bath tap is to turn off the water supply. This can usually be done by turning the isolation valves located underneath the sink. Make sure to test that the water is completely turned off before proceeding.
2. Remove the Handles
Once the water supply is off, you can start by removing the handles of the tap. This can usually be done by unscrewing the decorative cover on the handle to reveal the screw beneath. Use a screwdriver to remove the screw and then gently pull off the handle.
3. Replace the Washer
Inside the tap, you will find the valve seat and washer. The washer is the most common cause of a leaky tap and can easily be replaced. Take the old washer to a hardware store to find an exact replacement. Once you have the new washer, simply remove the old one and replace it with the new one.
4. Reassemble the Tap
After replacing the washer, reassemble the tap by putting the handle back on and tightening the screw. Make sure everything is securely in place before turning the water supply back on. Test the tap to see if the leak has been fixed.
By following these simple steps, you can easily fix a leaky bath tap and save yourself the cost of calling a plumber. Remember to turn off the water supply before starting and take your time to ensure everything is done correctly.
Conclusion
Don’t let a leaky tap ruin your day. With this step-by-step guide, you can quickly and easily fix the problem yourself. Give it a try and say goodbye to that annoying drip. If you have any questions or need further assistance, feel free to leave a comment below. Happy fixing!